Cisco 350-601 Exam Dumps

Cisco 350-601 Sample Question Answers

Cisco 350-601 Sample Questions

Question # 1

Refer to the exhibit. What is the result of executing this python code? 

A. It backs up Cisco switches to Cisco Prime infrastructure.  
B. It sends the switch configuration to Cisco TAC.  
C. It sends a Cisco device backup to a remote destination.  
D. It schedules a backup on a Cisco switch using EEM.  

Answer: Answer: C

Show Answer

Question # 2

Refer to the exhibit The communication between the web server and the application server experiences poor performance The network engineer must collect the traffic between the two servers, including the payload for more investigation The collected data must be sent from the remote site to the headquarters. Which action accomplishes this goal?

A. Configure an ERSPAN session between N5K-1 and N5K-2.  
B. Configure a SPAN session between N5K-1 and N5K-2  
C. Configure SNMP on N5K-1 to send the data to the monitor server  
D. Configure NetFlow on N5K-1 to send the data to the monitor server  

Answer: Answer: A

Show Answer

Question # 3

An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the upstream vPC switch peers. Which vPC feature must be implement to ensure that vPC and non-vPC switches receive same STP bridge ID from the upstream vPC switch peers? 

A. vpc local role-priority 4000  
B. peer-switch  
C. system-mac 0123.4567.89ab  
D. peer-gateway  

Answer: Answer: B

Show Answer

Question # 4

Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true? 

A. Cisco Fabric Services must be disabled before enabling port security.  
B. Port security can be enabled only globally and affects all VSANs.  
C. Auto-learning is always enabled automatically when port security is enabled.  
D. Any devices currently logged in must be added manually to the device databased.  

Answer: Answer: C

Show Answer

Question # 5

A cisco Nexus 9000 series switch experiences a startup configuration comuption. The engineer must implement a procedure to recover configuration file from the switch. Which command set must be used?

A. 1. Copy the running-configuration to the startup configuration. 2. Clear the current configuration of the switch. 3. Restart the device. 4. Copy a previously saved configuration file to the running configuration.
B. 1. Clear the current configuration of the switch 2. Restart the device. 3. Copy the running configuration to the startup configuration 4. Copy a previously saved configuration file to the running configuration 
C. 1. Clear the current configuration of the switch 2. Restart the device. 3. Copy a previously saved configuration file to the running-configuration 4. Copy the running-configuration to the startup configuration. 
D. 1.Restarting device. 2. Copy the running-configuration file to a remote server. 3. Clear the current configuration of the switch. 4. Copy the running configuration to the startup configuration 

Answer: Answer: C

Show Answer

Question # 6

What is a benefit of using the Cisco UCS Lightweight upgrade feature? 

A. Security updates are scheduled with the next reboot of the fabric interconnects.  
B. All servers are rebooted to push the latest updates.  
C. The firmware version of a component is updated only when it has been modified.  
D. A soft reboot is available for the fabric interconnects.  

Answer: Answer: C

Show Answer

Question # 7

A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements? 

A. Modify the privilege level assigned to the user  
B. Define a custom user role and assign it to users  
C. Assign the user "Employee1" the network-operator role  
D. Assign users to a specific Cisco UCS locale  

Answer: Answer: D

Show Answer

Question # 8

A Cisco Nexus 7000 Series switch runs VXLAN, and interface Ethernet 7/30 is configured as a trunk port. Which command set configures the switch to act as a gateway for VLAN 50? interface Ethernet7/30 no switchport no shutdown service instance 1 vni no shutdown

A. encapsulation profile VSI_50_TO_500 default 
B. encapsulation profile vni VSI_50_TO_500 Question No : 193 Cisco 350-601 : Practice Test 149 dot1q 500 vni 50 bridge-domain 500 member vni 50 interface Vlan500 ip address 10.50.50.51/24
C. encapsulation profile vni VSI_50_TO_500 dot1q 500 vni 50 bridge-domain 500 member vni 50 interface Bdi500 jp address 10.50.50.51/24 
D. encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500bridge-domain 50 member vni 500 interface Bdi50 ip address 10.50.50.51/24
E. encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500 bridge-domain 50 member vni 500 interface Vlan50 ip address 10.50.50.51/24 

Answer: Answer: C

Show Answer

Question # 9

A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy. Which configuration should be used for the fan policy of the server?

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Answer: Answer: A

Show Answer

Question # 10

Refer to the exhibit A network administrator experiences these issues with the network: PC1 is experiencing a buffering problem for video applications The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet The engineer wants to configure the required traffic capture to investigate the issue further Which configuration must be implemented to monitor the traffic?

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Answer: Answer: D

Show Answer